SMART DIALER - IoT communicator for Fire Alarm Systems ➤ SMART DIALER - IoT notification device for Fire Alarm Systems
BUY NOW from
96€ to 50.50 € / lot (10 pcs) VAT not inc.
valid to 30.09.2023
NEW! SMART DIALER- IoT - THE BRAND NEW UNIVERSAL GSM COMMUNICATOR
THE BEST NOTIFICATION DEVICE FOR FIRE ALARM SYSTEMS OF ANY TYPE AND BRAND
✔ Quick setup for a minute via cloud system (CLOUD) by mobile or computer, or by SMS commands
✔ FREE application for iOS and Android
✔ FREE software for set-up and configuration
✔ Send pre-recorded voice massage
✔ Compatible with all mobile operators all over the world
✔ Notifies UNLIMITED NUMBER OF USERS Via cloud system (CLOUD) at an event
✔ Activating one or both inputs (IN1, IN2) of the SMART DIALER-IoT could cause triggered of the outputs (OUT1, OUT2)
✔ Five users can be notified for an event by (VOICE CALL) and / or via SMS on a mobile phone>
Purpose of Use
The last generation GSM communicator SMART DIALER-IoT is used as an additional device for remote control and notification of UNLIMITED NUMBER OF USERS. The main purpose of SMART DIALER-IoT is remote monitoring and tracking status of the fire alarm system. The device NOTIFY the owner, the manager or the fire department on FIRE ALARM event. This means comphort and security! The device is compatible with all tipes and brands of fire alarm systems. Quick setup for a minute via cloud system (CLOUD) by mobile or computer, or by SMS commands whiteout need to go to the place where the device is installed. This saves a lot of time and additional costs for installers!!!
- Notifies UNLIMITED NUMBER OF USERS Via cloud system (CLOUD), WEB and mobile devices. UNLIMITED NUMBER OF USERS can control the fire systems mode or can be notified.
- Five users can be notified for an event by (VOICE CALL) and / or via SMS on a mobile phone.
- Activating one or both inputs (IN1, IN2) of the SMART DIALER-IoT could cause activating of the outputs (OUT1, OUT2). This functionality gives additional possibilities for managing and control.500 phone numbers.
- Send pre-recorded voice massage ( for models with additional microphone included in the package ).
- By pressing a button on the caller’s phone during a call, the microphone sensitivity and speaker volume levels can be remotely adjusted ( for models with additional microphone included in the package ).
- If a currently dialled number does not answer, the device has an algorithm allowing it to continue dialling and redialling numbers from a previously set list.
- The trigger time can be set for each input.
- 1 output can be used for call visualisation by connecting an LED.
- In the event of a power failure, the output maintains the last state it was in, resuming it once power is back on.
- Digital intput which can initiate a phone call and/or SMS when activated.
- Report via SMS for inputs and outputs position supply voltage level, battery level and GSM signal level.
- Ability to measure mobile network quality in real-time with the goal of choosing the best position for the antenna.
- Power Supply:
9 ÷ 30VDC
- Digital Inputs:
2 inputs (positive, negative)
- Digital outputs:
2 outputs (open collector, 1A max)
- GSM module:
- Consumption in IDLE mode:
- Power Consumption while transmitting:
- Operational Temperature:
-40˚C ÷ +85˚C
74mm х 64mm х 28mm
- For models with additional microphone, built-in speaker and included battery:
- Power Output:
- Internal battery for autonomous operation
3.7V/300mAh Li-ion battery, allowing emergency connection up to 60 min. call and 12h in Standby mode
- Microphone input:
- For morе information see here:
Included in the package
- 1 x Smart Dialer in a plastic box
- 1 x GSM antenna with a 3 m cable